RIC 4 EAR MOLDS kit  (receiver in canal)          

 improve  hearing AID performance

Learn how to make your own flexible DIY custom RIC Ear Molds  instantly in your own home, at lowest cost. 4 or 24 mold kit

Custom DIY (Do It Yourself) RIC Earmolds are for all Brands of Hearing Aids and can also be used for  Flying, motorcycles, Off-Road, Music, MP3 Ear Buds and can also make custom plugs for Sleeping, Swimming and Shooting.

They are exact fit, most comfortable, made of Medical-grade, flexible, Silicone rubber.  Each canal Ear Mold costs $5 (not $80 - $200 Ea), the  BASIC DIY Kit makes about 4 average size molds. The BULK KIT (below) makes 24 average size ear molds and costs less than $2 each and they are shipped FREE.

GET ADVANCED ANSWERS TO YOUR HEARING NEEDS BELOW

A custom HCPB EarMold can block outside noise, improve your  hearing quality, loudness volume, hold the speaker tube securely in the ear and prevent it from slipping out.  It only takes less than 10 minutes.

Just mix the 2 colors of soft putty, as shown below, add to your ear mold tube, insert in your ear and in 10 minutes you have your own custom, permanent, INCONSPICUOUS, flexible ear mold.                                                         

RIC hearing aid + HCPB Silicone 2 part Silicone 

Permanent comfortable HCPB hearing aid ear mold

    There are 3 skin color options: TAN, BROWN OR DARK        BROWN. SELECT YOUR CHOICE, BELOW.

                          Another significant benefit of using an earmold is a greater reduction of BACKGROUND Noise, than can be achieved without an earmold. With a loose-fitting ear tip (dome) The outside noise can easily leak into the ear and add to the patient's confusion. But, a custom made earmold can seal the ear and prevent that noise leakage. The hearing aid programming is not able to correct this without a means of preventing the noise from entering the ear canal. Once the ear is fitted with a custom earmold the hearing aid programming can reduce the background noise.

100% MONEY BACK GUARANTEE


Not 100% satisfied, return it for a FULL REFUND, less postage.

                            See BUY NOW button below



Don Rowley

.

 HCPB          
Hearing, Correction, Protection & Benefits

About the Author

Hi, I'm Don Rowley, the inventor of flexible silicone rubber ear molds in 1965. I had worn 2 hearing aids for 10 yrs and was frustrated with the common, hard uncomfortable Lab ear molds that made my ears sore and gave less than the best results. I made flexible, comfortable and better hearing silicone ear molds for myself and later for my patients.

About 10 yrs later the earmold labs began making copies, but no one has duplicated all the benefits of my HCPB, DIY Ear molds and my price is the very lowest at $2 each, because I sell bulk directly to you and understand the use and experience of hearing aids better than the sellers of hearing aids that have normal hearing. If you have purchased an ear mold from your hearing aid provider, paid $80 to $200 each and had many problems, you will really appreciate being in control of your own hearing satisfaction, save time and a very large amount.

For more about my history go to the tab,"ABOUT US", above.

See BUY NOW button below

TESTIMONIALS

Dear HCPB,

My hearing slowly got worse and worse. A friend gave me a pair of his old BTE hearing aids.

His hearing aid ear molds were custom made for his ears, not mine. I tried various domes but they would either not stay in my ears or allow feedback.

I found HCPB selling BTE silicone molds and tubes that Don Rowley invented. What a difference!

They stayed in my ears, stopped slipping out and the audio was much better. How nice to have this problem solved.

I am locked in to your ear molds for life. Thanks Don.

Bert Epler

EE

Bert Epler
EE

Dear customer service, HCPB,

I bought the 24 mold kit from you a few years ago. I think it is a great product and did everything that you said. They don't wiggle and slip out of my ears anymore and I hear much more clearly.

I use open fit, RIC (Receiver In Canal) hearing aids. The domes snap on to the end of the receiver. As your instructions say: I mix the 2 color silicones until they are one flesh color, then I cover the tube RIC, insert it in the ear and in 10 minutes I am a happy listener.

What is the shelf life on this product? They are still working, but take about 15 minutes to become firm instead of the 8-10 minutes in the beginning? After they were repaired and returned, I didn't check before i made the molds and wasted some silicone. When they came back from repair, this time, I tested them and made a new set of earmolds.

So the fact of the matter,is i am almost out of your silicone putty material, and don't want to run out. Hoping you continue to sell these kits, as they are so wonderful and low cost. You have saved me soooo many hundreds of dollars compared to the charges at the local Audiologist, who also was reluctant to make ear molds for me because I didn't buy the hearing aids from her. I am glad I found you instead.

They finally fixed the aids and I am happy now, but I just want to make sure you will keep making this great product.

Valentina Amlinskaya
Jane Smith

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

​Dear HCPB,

I have been wearing hearing aids a long time. I know a good seller when I come in contact with one. While, I had my doubts, I am very satisfied and grateful to have saved so much time and money that I have previously paid to my Audiologist. Instead of $200 for 2 molds, it only cost me $30 and I still have enough silicone putty left to make at least 10 more earmold sets. It only took 2 days to get my order and not the usual 2 weeks after the ear impressions were taken, which was a total of 3 weeks before the new ear mold fitting appointment. And there was often the need to go back for adjustments later to relieve soreness in my ears.

At the end of the day, I got a product where I can make my own ear molds at home, in 10 minutes, that feel good, hear better, rare feedback and fit right to work with my hearing aid receivers.


Grateful and a customer for life.

Jack wilson
Shane Melaugh

BUY NOW - skin Color choice below

4 RIC EAR MOLDS KIT

 FOR ALL RIC HEARING AIDS

3 SKIN COLOR CHOICES

STOPS RIC/TUBE FROM SLIPPING OUT OF EAR

  • EASY PRINTED AND VIDEO INSTRUCTIONS
  • IMPROVE YOUR HEARING SOUND QUALITY
  • QUICK, EASY TO MAKE YOUR CUSTOM EAR MOLD
  • IMPROVED HEARING IN NOISY SITUATIONS

ONLY - $19.88

FREE SHIPPING

COLOR OPTION

24 EAR MOLD KIT IS BELOW, Color choice at checkout

24 RIC EAR MOLDS KIT,  (Avg size ear)

 FOR ALL RIC HEARING AIDS (Receiver in Canal

3 SKIN COLOR CHOICES

STOPS RIC/TUBE FROM SLIPPING OUT OF EAR

  • EASY PRINTED AND VIDEO INSTRUCTIONS
  • IMPROVE YOUR HEARING SOUND QUALITY
  • QUICK, EASY TO MAKE YOUR CUSTOM EAR MOLD
  • IMPROVED HEARING IN NOISY SITUATIONS

ONLY - $29.77

FREE SHIPPING

COLOR CHOICE

THANK YOU FOR YOUR PURCHASE,                           It will be promptly mailed... 

________________________________________________________________

Enter your text here...

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

John Doe
UI/UX Designer