Are you ready to get the best ear mold hearing of your life?

Learn how to make your own flexible custom Ear Molds instantly in your own home, at lowest cost.

Custom DIY (Do It Yourself) Earmolds are for all Brands of Hearing Aids.

They are exact fit, most comfortable, made of Medical-grade, flexible, Silicone rubber. Each canal Ear Mold costs from $2- $20 (not $80 – $200 Each), this DIY Kit makes about 24 average size molds and is shipped FREE.

get set

really Hear

your key to lowest cost complete satisfaction

A custom HCPB EarMold can block outside noise, REDUCE FEED BACK, improve your hearing quality, increase loudness volume, hold the ear mold, speaker tube securely in the ear and prevents it from slipping out.

Takes less than 10 minutes to make.

Just measure one eighth teaspoon of white soft putty from the kit and 1/8 tsp colored soft putty. Mix and apply to the HCPB tube, insert the tube with mixture in the ear for 10 minutes and you will have your own permanent earmold, as shown below,

Below is the 24 EARMOLD KIT with new HCPB tubes.

Below left, the 2 colors of soft putty have been mixed and are wrapped around the sound tube.

On the right is the finished, permanent earmold, made in the exact shape of my ear.

SECURE TUBE

The tube/tip is no longer loose in the ear. I can walk and move with confidence.

LOWEST POSSIBLE COST

Earmold with new tube cost only $20, not $80-$200...

IMPROVED COMFORT & HEARING

Eliminate sore ears. FEEDBACK, IMPROVE hearing quality. Broader frequency response. low frequency hearing.

Testimonials:

Before I made my new HCPB earmolds my life was too restricted. I couldn't play tennis, go jogging, or similar activity because my hearing aid sometimes fell off. If I took them off, then I couldn't hear well. My Audiologist wanted $300 for two molds and she said it would take about 20 days after an appointment for ear impressions.

Instead, I discovered your HCPB Do-it-yourself earmolds and for less than $50 for both ears. Your easy kit arrived in 3 days and that same day my problems were solved. The earmolds are comfortable, I hear better in most situations and THEY STAY IN MY EARS WITHOUT SLIPPING OR FALLING OUT.

I am soooo very happy... Marie Foster

Marie Foster

"

My main problem was difficulty understanding my husband and other male voices, including TV and cellphone. I noticed that I could hear much better by putting my finger over my ear where the tube enters. My Audiologist tried different Dome tips, but they were not better and some made my ear sore others were too loose, tickled, itched and slipped out. Her cost was $250 for custom molds.

Then I discovered your HCPB earmold kits. Now I am a happy wife, understanding my husband and he is happy not to keep repeating. My new earmolds are not only comfortable, but they are inconspicuous.

Thanks, HCPB.,

Anna Olson - blogger

~~~~~~~~~~~~~~~~~~~~~~~

When it came time to replace my Audiologist earmolds, I discovered your website and was pleased with your fast service, low cost (saved $200), more comfortable and my hearing aid performance improved.

Thanks very much.

Jane Dawson

Beautician

I heard about your products from a long-time customer who was very happy with your service. So I took a chance on his recommendation and am really glad that I did. My Audiologist was unable to satisfy my poor hearing in noisy situations. But with my new silicone DIY ear molds, I now hear so much better and I made them myself, quickly at home.

Thank you for a great low-cost product.

John Daniels

Internet Tech.

Dear HCPB,

My hearing slowly got worse and worse. A friend gave me a pair of his old BTE hearing aids.

His hearing aid ear molds were custom made for his ears, not mine. I tried various domes and stock earmolds, but they would either not stay in my ears, hurt or allow feedback.

I found HCPB selling BTE silicone molds and tubes that Don Rowley invented. What a difference!

They stayed in my ears, stopped slipping out, were comfortable and the audio was much better. How nice to have these problems solved. I even sleep with my hearing aids.

I am locked in to your ear molds for life. Thanks Don.

Bert Epler, EE

100 % Money Back Guarantee

If not 100% satisfied, return it for a FULL REFUND, less postage.

Don Rowley, Inventor

About the Inventor

Hi, I’m Don Rowley, the inventor of flexible silicone rubber ear molds in 1965. I had worn 2 hearing aids for 10 yrs and was frustrated with the common, hard uncomfortable Lab ear molds that made my ears sore, did not stop feedback and gave less than the best results. I made flexible, comfortable and better hearing silicone ear molds for myself and later for my patients.

About 10 yrs later the earmold labs began making copies at $80.00 to $200. each, but no one has duplicated all the benefits of my HCPB, DIY Ear molds and my price is the very lowest at $2- $19 each, because I sell bulk directly to you and understand the use and experience of hearing aids better than the sellers of hearing aids that have normal hearing. If you have purchased an ear mold from your hearing aid provider, paid $80 to $200 each and had many problems, you will really appreciate being in control of your own hearing satisfaction, save time and a very large amount of money.

~~~~~~~~~~~~~~~~~~~~~~~~~~~

SELECT HCPB TUBE QUANTITY,, SKIN COLOR and 4 Canal TIP SIZE CHOICES

at BUY NOW button below

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

FOR BTE HEARING AIDS

This is for BTE Behind The Ear with hard support hook above photo which shows aid, HCPB tube and 2 pads of silicone putty to be mixed.

( NOT for RIC or OPEN FIT HEARING Aids, see a different page )

STOPS FEED BACK & TUBE FROM SLIPPING OUT OF EAR

EASY PRINTED INSTRUCTIONS AND VIDEOs
IMPROVE YOUR HEARING SOUND QUALITY
QUICK, EASY TO MAKE YOUR CUSTOM EAR MOLD
IMPROVED HEARING IN NOISY SITUATIONS
Prevent FEEDBACK and slipping in ear
Lowest cost= $2 each remake
Guaranteed or money back
FREE USPS PRIORITY 2-3 Day SHIPPING
SELECT TUBE QUANTITY: 1 or 2, tubes,,
3 SKIN COLOR Choices
4 ear TIP SIZE Choices
Choose quantity of earmold silicone material,
PAY WITH CREDIT CARD, PAYPAL OR CHECK.
BUDGET KIT is lowest cost per Kit ( 4 earmold remakes)
ECONOMY KIT is lowest cost per earmold ( 24 earmold remakes)

ECONOMY KIT 24 BTE EAR MOLDS Silicone putty Kit = $ 2 Each Earmold (remake)

Choice of HCPB Tubes quantity#

2 Tubes Kit $49.77

1 Tube Kit = $39.77

Make option choices by clicking the down arrows beside these options below

BUDGET KIT

4 BTE EAR MOLDS Silicone putty Kit $5 Each Earmold

(remake)

Kit includes choice of HCPB Tubes # 2 Tubes Kit = $44.88

1 tube Kit - $34.88